CLEANING VEHICLE CURTAIN -SIDES, MARQUEE’S AND BOUNCY CASTLE / INFLATABLE’S
Due to the sensitive material used to manufacture Vehicle Curtain Sides, Marquee’s
and Inflatables (Bouncy Castles), special TFR Detergents should be used. A less
harsh formulation will not harm the sensitive coatings normally found on Flexible
PVC Materials. Check out our guide to professionally clean Flexible PVC Materials
Hot or Cold Pressure Washer
Pump Up Sprayer
Vehicle Cleaning Brush
Curtain Side / Marquee Cleaner
1. Pre-rinse the area thoroughly with the Pressure Washer or water hose..
2. Mix and apply Curtain Side / Marquee Cleaner Detergent either by brush or pump
up sprayer or pressure washer. If vertical, apply from bottom upwards.
3. Clean. Brush the area with a suitable brush and then using the pressure washer,
clean approx 100mm (4”) from the surface until all the area has been cleaned.
4. Rinse the area off thoroughly using pressure washer or hose. AVOID CHEMICAL TO
DRY ONTO THE SURFACE.
Q. Which is the best product to use to clean Curtain Sides, Marquee’s & Bouncy Castles?
You should not use normal Traffic Film Removers on Curtain Sides and Marquee’s due
to the sensitive materials used to coat the Flexible Coverings.
We recommend UnoChem Curtain Side and Marquee Cleaner Concentrate and Axomech Bouncy
Castle Cleaner. Both of these products have been specially formulated to clean sensitive
coatings on Flexible Material Covers.
We also recommend for exceptional cost-in-use benefits, UnoChem Hyper Concentrate
Curtain Side & Marquee Cleaner. Mix up to 1:50 before using.
READY TO USE CURTAIN SIDE AND MARQUEE CLEANER CONCENTRATE
HYPER CONCENTRATE CURTAIN SIDE AND MARQUEE CLEANER PRE-MIX